HP LASERJET 1005
250 sheets of regular weight 20 lb (75 g/m2) paper or up to 30 envelopes, Laser Printer, 7.3 kg (16.1 lb)
Kategori
Check AWB / No. Resi
Introduction
The HP LaserJet 1005 Series printer is designed to print documents easily. It provides 600 dots-per-inch (dpi) printing at a rate of 14 pages-per-minute (ppm) on A4-sized paper. The simple control panel and improved paper handling make this product very easy to use. It delivers laser-quality printing through a direct (local) universal serial bus (USB) or parallel connection to a computer. The printer can then be shared with other users on a network using Microsoft (R) Windows sharing. All software options are available to network users through this type of networking.
The printer’s main input tray has a 250-sheet capacity for continuous, multiple-page printing. Manual, single-sheet printing is possible through the priority input tray. Both trays are center-justified for all supported paper sizes. The printer output bin holds up to 125 sheets.
Physical specifications
The following table indicates the physical specifications for the HP LaserJet 1005 Series printer.
| Category | Specification |
|---|---|
| Height | 253 mm (10.0 inches) |
| Depth | 486 mm (19.1 inches) |
| Width | 415 mm (16.3 inches) |
| Weight (cartridge installed) | 7.3 kg (16.1 lb) |
Environmental specifications
The following table indicates the environmental specifications for the HP LaserJet 1005 Series printer.
| Category | Specification |
|---|---|
| Operating environment - printer plugged into an alternating current (AC) outlet | Install in a well-ventilated, dust-free area. Temperature: 10 to 32.5 degrees Celsius (C) (50 to 90.5 degrees Fahrenheit [F]) Humidity: 20% to 80% relative humidity (no condensation) |
| Storage environment - printer not plugged into an AC outlet | Temperature: 0 to 40 degrees C (32 to 104 degrees F) Humidity: 10% to 80% relative humidity (no condensation) |
Power specifications
The following table indicates the power specifications for the HP LaserJet 1005 Series printer.
| Category | Specification |
|---|---|
| Power requirements | 110-127 volts (V) of alternating current (VAC) (+/-10%), 50/60 Hertz (Hz) (+/-2) or 220-240 VAC (+/-10%), 50/60 Hz (+/-2) NOTE: Power sources are not interchangeable. |
| Power consumption (in continuous copy mode) | 285 watts (W) on average |
| Power consumption (standby/power save) | Less than 10 W |
| Power consumption (idle) | 7 W |
| Power consumption (off) | 0 W |
| Minimum recommended circuit capacity | 4.5 A at 115 V 2.3 A at 230 V |
Performance specifications
The following table indicates the performance specifications for the HP LaserJet 1005 Series printer.
| Category | Specification |
|---|---|
| Print resolution | 600 dpi |
| Print speed | 14 ppm (A4) |
Skew specifications
The following table indicates the skew specifications for the HP LaserJet 1005 Series printer.
| Category | Specification |
|---|---|
| Print skew - left | 0.8% (2 mm over 250 mm in length) for cut-sheet media 1.5% (3.3 mm over 220 mm in length) for cut-sheet media 0.87% (1.65 mm over 190 mm in width) for cut-sheet media |
| Print skew - right | 1.5% (3.3 mm over 220 mm in width) for envelopes, postcards, A5, and cut-sheet media |
| Cut-sheet leading edge skew | 0.87% (1.6 mm over 190 mm in width) |
Acoustic specifications
The following tables indicate the acoustic specifications (noise levels) for the HP LaserJet 1005 Series printer, tested at 14 ppm (per ISO 9296).
Print operating acoustical emissions specifications
| Category | Specification |
|---|---|
| Sound Power Level, LWAd (1 bel = 10 dB) | 6.1 dB (A) |
| Sound Pressure Level, LpAm (operator position) | 56 dB (A) |
| Sound Pressure Level, LpAm (bystander position) | 48 dB (A) |
Copy operating acoustical emissions specifications
| Category | Specification |
|---|---|
| Sound Power Level, LWAd (1 bel = 10 decibels) | 6.4 dB (A) |
| Sound Pressure Level, LpAm (operator position) | 60 dB (A) |
| Sound Pressure Level, LpAm (bystander position) | 50 dB (A) |
Printer capacities and ratings specifications
The following table indicates the printer capacities and ratings specifications for the HP LaserJet 1005 Series printer.
| Category | Specification |
|---|---|
| Print speed | 14 ppm First page out in less than 10 seconds |
| Paper input tray capacity | 250 sheets of regular weight 20 lb (75 g/m2) paper or up to 30 envelopes |
| Output bin capacity | 125 sheets of regular weight 20 lb (75 g/m2) paper |
| Minimum media size | 76 x 127 mm (3 x 5 inches) |
| Maximum media size | 216 x 356 mm (8.5 x 14 inches) |
| Media weight | Output bin - 60 to 105 g/m2 (16 to 28 lbs) Straight through media path - 60 to 163 g/m2 (16 to 43 lbs) |
| Base memory | 1 megabyte (MB) of random-access memory (RAM) |
| Print resolution | 600 dpi |
| Duty cycle | 7,000 single-sided pages per month |
| PCL | Level 5e via MS-DOS (R) programs running in a Windows MS-DOS DOS shell |
Port availability specifications
The following table indicates the port availability specifications for the HP LaserJet 1005 Series printer.
| Category | Specification |
|---|---|
| USB | Compatible with the USB 2.0 specification |
| Parallel | IEEE 1284 |